The cost to build a self-storage facility in 2026 ranges from about $55 to $85 per gross square foot for single-story drive-up. The range falls between $80 and $120 for single-story climate-controlled and $105 to $170 for multi-story. These cost ranges include hard costs only. Soft costs and equipment add another 25% to 40%, and land comes on top of that. A 60,000-square-foot project usually costs between $6 million and $12 million all-in.

A self-storage facility is a commercial property that provides secure storage units such as rooms, lockers, or containers for individuals and businesses. Customers usually rent these units monthly, with access to their stored belongings according to the facility’s policies.

This cost guide breaks down the cost to build a self-storage facility the way an estimator builds a bid: trade by trade, with a sample budget you can check your own numbers against.

How Much Does It Cost to Build a Self-Storage Facility in 2026?

Building type sets the price more than any other choice. Single-story drive-up runs $55 to $85 per gross square foot. Single-story climate-controlled costs $80 to $120, and multi-story climate-controlled runs $105 to $170. These ranges do not include land, soft costs, and equipment.

Facility type Hard cost per gross sq ft Net rentable share
Single-story drive-up $55 to $85 80 to 88%
Single-story climate-controlled $80 to $120 About 82%
Multi-story climate-controlled $105to $170 65 to 75%
Conversion of an existing building $35 to $70 Varies by shell
Covered RV and boat $25 to $55 Open bays

The self storage construction cost per square foot also changes by region. For single-story climate-controlled work, the Midwest runs about $76 to $105 per foot, while coastal California runs about $125 to $165. Labor rates, energy and seismic codes, and permit delays drive most of that gap.

What Does a Line-Item Self-Storage Estimate Look Like?

A real estimate splits the job into about 10 trade lines. Each line is priced from quantities, not from a per-foot guess.

The sample below is a 60,000 gross square foot single-story drive-up project on 4.5 acres, with about 425 units in a mid-cost suburban market. It uses typical 2026 bid ranges. Your site and market will move each line.

Line item Cost Per gross sq ft
Sitework, paving, stormwater, utilities $1,350,000 $22.50
Foundations and slab $480,000 $8.00
Metal building (supply and erect) $1,560,000 $26.00
Unit partitions and hallway system $300,000 $5.00
Roll-up doors (425 openings) $340,000 $5.67
Electrical and lighting $210,000 $3.50
Gate, fence, cameras, access control $150,000 $2.50
Office and rental center $120,000 $2.00
Fire alarm and code items $60,000 $1.00
Subtotal $4,570,000 $76.17
GC general conditions and fee (12%) $548,400 $9.14
Contingency (5%) $255,920 $4.27
Total hard cost $5,374,320 $89.57

Take sitework out and the building alone comes to about $63 per gross foot. That figure is the drive-up storage unit construction cost most building quotes refer to. Sitework is the line that surprises first-time owners.

Lenders want a budget like this before they size a construction loan. Many developers use commercial estimating services to build it from schematic drawings. That way, the bank sees quantities and unit prices instead of one round number it has to trust.

How Much Does Sitework Cost?

Sitework usually costs $4.25 to $8 per square foot of land in normal conditions. That range comes from The Parham Group, a self-storage developer and consultant, as reported by Storable.

Drive-up sites need a lot of it. Every unit faces a paved aisle wide enough for a moving truck. The sitework line covers:

  • Clearing, grading, and cut-and-fill
  • Stone base and asphalt or concrete drive aisles
  • Stormwater detention (a pond or underground system)
  • Water, sewer, and power taps
  • Perimeter fence and gate footings

Rock, poor soil, or a large detention pond often double this line. Earthwork and paving quantities come straight from the civil plans. Because of that, many general contractors send this takeoff to sitework estimating services. One wrong cut-and-fill number can move the budget by six figures.

How Much Does the Metal Building Cost?

The metal building shell usually runs $22 to $38 per square foot installed. Terrapin puts pre-engineered metal building shells in that range, with finished assemblies at $55 to $80 per square foot. The supplier package covers frames, purlins, wall and roof panels, and trim. Erection labor is a separate cost.

Pre-engineered metal building estimating works best when the supplier quote and the erection labor are priced as two separate lines. Supplier quotes often leave out freight, anchor bolts, insulation, or the engineering that sizes the foundations. Those missing pieces come back later as change orders.

What Do Doors, Security, and the Office Add?

Doors are priced per opening, not per foot. A unit mix with lots of 5×5 and 5×10 units means more doors and more partition walls for every foot you rent.

Security is the line owners most often underbudget. Gates, keypads, cameras, kiosks, and the management software add up quickly. On multi-story, climate-controlled projects, Terrapin puts this equipment and security package at 4% to 8% of hard cost. Check whether your contractor includes it in the bid or leaves it for you to buy.

What Do General Conditions, Fee, and Contingency Add?

General conditions and the contractor’s fee usually add 10% to 15% on top of the trade costs. General conditions pay for the site superintendent, trailer, temporary power, dumpsters, and insurance. The fee is the contractor’s profit.

Contingency covers surprises. You should carry about 5% when drawings are complete. Carry closer to 10% at the concept stage, when half the design is still a guess.

How Much More Does Climate Control Cost?

Climate control adds about $20 to $40 per gross square foot to a single-story building. It is the biggest single design choice that moves the cost to build a self-storage facility. The extra money goes to:

  • Insulated metal panels or added wall and roof insulation
  • A vapor barrier
  • HVAC units and ductwork
  • A larger electrical service
  • Dehumidification in humid markets
  • Interior hallways and interior doors

The cost to build climate controlled storage units pays back through rent. Climate-controlled street rates typically run 30% to 55% higher than standard units.

Don’t cut the envelope to save money up front. A leaky wall makes the HVAC system run harder every month for the life of the building.

Why Does Multi-Story Storage Cost More per Foot?

The multi-story self-storage construction cost runs $105 to $170 per gross square foot because the building needs much more. That includes elevators, heavier framing to carry the upper floors, fire sprinklers built to the NFPA 13 standard, stairs, and accessible routes.

Multi-story buildings also lose more floor space to halls and elevators. Only 65% to 75% of the floor is rentable, compared with 80% to 88% for single-story.

That is why smart owners compare cost per net rentable foot:

  • Multi-story at $140 per gross foot ÷ 70% rentable = $200 per rentable foot
  • Single-story climate at $100 per gross foot ÷ 82% rentable = $122 per rentable foot

Multi-story still makes sense in cities where land is scarce and expensive. On a cheap suburban lot, it rarely does.

What Do Soft Costs and Land Add?

Soft costs run 15% to 22% of hard costs on most self-storage projects. This is where the cost to build a self-storage facility gets underestimated most often.

Soft cost Share of hard cost
Architecture and engineering 5 to 8%
Permits, plan review, impact fees 2 to 5%
Loan fees, appraisal, title, environmental 3 to 6%
Insurance and bonds 1 to 2%

Land usually makes up 12% to 18% of total project cost in smaller markets, 18% to 28% in core suburbs, and 30% to 45% in dense urban infill. Total self storage development cost is the sum of these three:

  • Hard costs
  • Soft costs
  • Land

What Is the Cost to Build 100 Storage Units?

For a single-story drive-up project, expect about $12,000 to $20,000 per unit in hard costs, before land and soft costs. Here’s the calculation:

  1. 100 units at an average of 150 square feet = 15,000 rentable square feet
  2. At 88% rentable, that needs about 17,000 gross square feet of building
  3. Building at $55 to $85 per foot = $935,000 to $1,445,000
  4. About 1.5 acres of sitework at $4.25 to $8 per foot = $278,000 to $523,000
  5. Total hard cost: about $1.2 million to $1.97 million

Small projects cost more per unit. The office, gate, utility taps, and design fees are mostly fixed, so they get spread over fewer doors.

What Is Pushing Self-Storage Costs Up in 2026?

Metals are the biggest pressure on costs this year. According to an Associated General Contractors of America analysis of federal price data, prices for inputs to new nonresidential construction rose 7.1% from June 2025 to June 2026, with aluminum, copper, and steel still climbing. Self-storage is a steel building with steel doors and lots of wire, so it feels this more than most building types.

Build times are stretching too. Yardi Matrix found the average construction time hit 431 days (14.4 months) for facilities finished in the fourth quarter of 2025. Every extra month adds loan interest.

There is also good news. Yardi Matrix’s August 2026 report showed the under-construction pipeline at only 2.1% of national inventory, with completions expected to fall 19% from 2025 levels. Less new supply means less competition when your doors open.

For any job that won’t break ground for six months or more, add an escalation line to the estimate.

Bottom Line

The cost to build a self-storage facility comes down to three choices: building type, site conditions, and how early you price the job trade by trade. Start with the per-foot ranges above. Then build a line-item budget with real quantities, and add soft costs, land, contingency, and escalation. Owners who do this before they buy land rarely get surprised after they break ground.

Frequently Asked Questions

Q1: How much does it cost to build storage units on land you already own?

Owning the land removes 12% to 45% of total project cost, depending on the market. You still pay for sitework, the building, and soft costs. Owner-contributed land is one of the main reasons new projects still make financial sense in 2026.

Q2: How long does it take to build a self-storage facility?

A single-story facility takes about 8 to 12 months from groundbreaking to occupancy. A multi-story facility takes 12 to 18 months. Permits add 4 to 9 months before that, depending on the city.

Q3: Is a metal building cheaper than concrete for self-storage?

Yes, for single-story drive-up. A metal building shell costs about $22 to $38 per square foot installed and goes up fast with little field labor. Tilt-up concrete and block make sense for some multi-story or hurricane-zone projects. For climate-controlled buildings, insulated metal panels on a steel frame give the best balance of build cost and energy cost.

Q4: Is converting an existing building cheaper than building new?

Usually, yes. Conversions from existing buildings range from $35 to $70 per gross square foot, roughly 40% to 60% of new construction. The building needs high ceilings (about 14 feet for climate-control), wide column spacing, and a fire sprinkler system that can be upgraded. Old big-box stores in suburbs are the most common conversion targets right now.

About the Author: Jason holder

Jason Holder is a content writer at SMA Estimating LLC, covering construction estimating, takeoffs, and bidding strategies in clear, practical language for contractors and project owners.
GET A QUOTE
×

Get in Touch!